+34 967 142 011 
PRESSURE REACTORS
We build custom pressure reactors for processes that demand safety, leak-tightness and control. Equipment calculated and built to work under demanding conditions of pressure, temperature, vacuum or agitation, with the precision each plant requires.
PRESSURE REACTORS
We build reactors for sanitary, aseptic or sterile processes, matched to each client specification. Equipment in stainless steel, duplex or special alloys, with agitation, emulsifier, coil, vacuum, pressure and interior finishes from Ra ≤ 1.2 μm down to Ra ≤ 0.4 μm, or lower where required.
What you need to know
Our experience in the pharmaceutical, cosmetics and medical speciality industries has led us to build reactors where every decision has a direct bearing on the safety of the product and the stability of the process. We are not only talking about pressure or vacuum: we are talking about sanitary design, high-purity finishes, sterility, traceability, cleaning and control. Each piece of equipment is matched to the client specification, combining materials, geometry, agitation, emulsifier, coil, connections and working conditions.
Every reactor starts from a precise technical definition: coils, agitators, emulsifiers, connections, 3D drawings, calculation, testing, certificates and the final dossier all meet the same manufacturing standard. We work to ASME BPE, cGMP/FDA, 3A and EHEDG, and to codes such as ASME VIII, EN 13445, AD 2000 or CODAP where these apply, so that the equipment reaches the plant fully documented.
We advise you on the right pressure reactor
We design every piece of pressure equipment from its service conditions, taking care of welds, joints, nozzles and connections so that it works reliably under pressure or vacuum.
In-house engineering, design and control from within
We build in coils, vacuum, pressure or temperature control to protect the stability of creams, gels, emulsions and sensitive preparations during the process.
More autonomy thanks to custom manufacturing
We look after roughness, polishing, welds and interior geometry to help cleaning, cut product hold-up and meet the demands of aseptic or sterile environments.
Finishes that protect the product
We match materials, agitation, emulsifier, connections and fittings to the viscosity, texture and demands of each pharmaceutical or cosmetic formulation.
Longer service life for your pressure reactor
We deliver drawings, calculations, tests, certificates and the final quality dossier so that the equipment reaches the plant with technical and documentary backing.
We are here to listen
Every project starts with understanding properly what you need. Describe your case and we will help you shape it with a practical outlook, manufacturing experience and an answer matched to your goals
